QSC K12

12" 1000 watt powered speaker

Recommended for: Outdoors/Indoors, Medium-Large Venues, up to 150 people

  • 2x 1/4"-XLR inputs (1 is mic/line switchable), 2x passthrough XLR outputs, 1 summed XLR output
  • Built-in 3 channel preset EQ settings
  • Lightweight (41lbs)



Features:
  • Lightweight portable powered speakers with legendary QSC amplifier power and reliability
  • 1000 watt continuous Class D power modules in all models
  • Extensive DSP enhances system performance
  • Attractive and professional appearance
  • Rugged ABS enclosures
  • Powder coated steel grille
  • Comfortable ergonomic handles
  • 35 mm pole sockets with Tilt-Direct™
- Specifications:
Configuration Multipurpose 2-way
Transducers Low-frequency High-frequency 12" cone transducer 1.75" diaphragm compression driver
Frequency Response (-6 dB) 52 Hz - 18 kHz
Frequency Range (-10 dB) 48 Hz - 20 kHz
Nominal Coverage (-6 dB) 75° conical
Maximum SPL1 131 dB peak
Amplifiers
Power Output2 1000 W continuous Class D (500 W LF, 500 W HF) 2000 W peak
Input Impedance (ohms) XLR / ¼": 40k balanced / 20k unbalanced XLR / ¼" MIC mode: 2260 balanced RCA: 10k
Controls Power, Gain A, Gain B, Mic/Line, LF Mode (Ext Sub/Norm/DEEP™), HF Mode (Flat/Vocal Boost), Front LED (On/Off/Limit)
Indicators Power, Signal A, Signal B, Standby, Limit, Mic
Connectors Balanced female XLR/¼" line/mic level input, Balanced female XLR/¼" line level input, Dual Balanced male XLR full range line level out , Balanced male XLR "mix" out, Stereo RCA line level input, Remote gain control, Locking IEC power connector
Cooling On demand, 50 mm variable speed fan
Amplifier Protection Thermal limiting, output overcurrent, overtemperature muting, GuardRail™
Transducer Protection Thermal limiting, excursion limiting
AC Power Input Universal power supply 100 - 240 VAC, 50 - 60 Hz
AC Power Consumption (1/8 Power) 100 VAC, 2.3 A 120 VAC, 2.01 A 230 VAC, 1.13 A
Enclosure
Material Impact resistant ABS
Finish Black paint
Grille Black powder coated 18 gauge steel
Dimensions (HWD) 23.7" x 14" x 14" 603 mm x 356 mm x 356 mm
Weight (Net) 41 lb / 18.6 kg
Available Accessories K12 TOTE, K12 YOKE, K SERIES M10 KIT
1 For comparison purposes and in accordance with common industry practice, maximum peak SPL specifications are theoretical calculations based upon transducer sensitivity and peak available amplifier power. 2 Independent of limiters and driver protection circuits.
Documents Owner's manual
Price: $75.00