A Solid, Dependable Amplifier
Recommended for: DJs, Passive Speakers
Recommended for: DJs, Passive Speakers
- Up to 830 watts @ 2 ohms in Bridged Mono mode
- Balanced 1/4" and XLR inputs
- Binding Posts and Speakon Outputs
- Signal and Clip LED
- Required for Passive Speakers
| SPECIFICATIONS | |
| STEREO MODE (Both Channels Driven) | |
| 8 ohms | |
| FTC 20 Hz - 20 kHz, 0.1% THD | 185 W |
| EIA 1 kHz, 0.1% THD | 200 W |
| 4 ohms | |
| FTC 20 Hz - 20 kHz, 0.1% THD | 280 W |
| EIA 1 kHz, 0.1% THD | 300 W |
| 2 ohms | 430 W |
| EIA 1 kHz, 1% THD | |
| BRIDGE MONO MODE | |
| 8 ohms | |
| FTC 20 Hz - 20 kHz, 0.1% THD | 530 W |
| EIA 1 kHz, 0.1% THD | 600 W |
| 4 ohms | 830 W |
| EIA 1 kHz, 1% THD | |
| Signal to Noise, 20 Hz-20 kHz | 100 dB |
| Distortion (SMPTE-IM) | Less than 0.01% |
| Input Sensitivity @ 8 ohms | 1.15V (+3.4 dBu) |
| Voltage Gain | 31.6x (30 dB) |
| Output Circuitry | AB |
| Power Requirements | 5A |
| 1/8 power pink noise at 4 ohms * | |
| ALL MODELS | |
| Distortion (Typical) | |
| 20 Hz - 20 kHz: 10 dB below rated power | Less than 0.03% THD, 4 and 8 ohms |
| 1.0 kHz and below: full rated power | Less than 0.03% THD, 4 and 8 ohms |
| Frequency Response | 20 Hz-20 kHz, ±1 dB |
| -3 dB points: 5 Hz - 50 kHz | |
| Damping Factor, 1 kHz and below | Greater than 300 at 8 ohms |
| Input Impedance | 10k ohms unbalanced, 20k ohms balanced |
| Input Clipping | 10 Vrms (+22 dBu) |
| Cooling | Continuously variable-speed fan, rear-to-front air flow |
| Connectors, each channel | Input: Active balanced; barrier strip, XLR and 1/4" (6.3mm) |
| TRS tip and XLR (pin 2 positive) | |
| Output: touch-proof binding posts and Neutrik® Speakon® | |
| Controls | Front: AC switch, Ch. 1 and Ch. 2 gain knobs |
| Rear: 10-position DIP switch | |
| Indicators | Power-On: Green LED |
| Signal: Yellow LED (1 per channel) | |
| Clip: Red LED (1 per channel) | |
| Amplifier Protection | Stable into reactive or mismatched loads |
| Load Protection | On/off muting, AC coupling (850, 1450), triac crowbar (1850HD, 2450, on each channel) |
| Power Requirements | 100, 120, 230 VAC, 50-60 Hz |
| Dimensions | 19" (48.3 cm) rack mounting, 3.5" (8.9 cm) tall (2 RU), |
| 15.9" (40 cm) deep (rack mounting to rear support ears) | |
| Weight | 35 lbs (15.9 kg) net |
Documents User's Manual
Price: $45.00
